No Reels Required!
You should NOT have to buy entire parts reels for proto and low volume build requirements. Other companies promise quick-turn pcb assembly as long as components are supplied on reels. They are not equipped to handle loose parts or itsy-bitsy cut tape. At Advanced Assembly, we can accept parts in any form of packaging - loose, cut tape or reels: - CUT TAPE – ANY length is acceptable for us – even itsy-bitsy cut tape is OKAY
- Loose Components – OKAY
Reels –OKAY
In most cases, your consigned kit will undergo a thorough audit upon reaching our dock. An audit report is usually generated within 24 hours of receiving your kit. However, depending on the urgency of your build, we may verify devices, as they are being populated, and report any discrepancies as they arise. Bare PCB’s We recommend having a silkscreen on your PCB that indicates polarity and 1st-pin markings. Special Handling Requirements Please provide special handling instructions if your kit includes devices that cannot be washed in an aqueous cleaner or other special handling requirements. Part Procurement Policy Solder Paste
Advanced Assembly uses leaded solder paste unless customer specifies otherwise. | 
