Request A PCB Assembly Quote

Please fill out the form below.

*
*
*
*
*
*


* More InfoTurn-key indicates that we quote purchasing this item for you. Full Turn-key means we take care of both parts and boards.

* More InfoBoard quantity, for example: 5, 25, 100
More InfoIf not selected, we will use standard leaded paste for your build. If selected, we will use lead-free RoHS paste to assemble your boards.
More InfoIf you are unsure if this applies to your build, it likely doesn't apply. Short for International Traffic in Arms Regulations, ITAR indicates your boards have an effect on United States national security.

*

Please refer to our file upload best practices before uploading.

Please follow ITAR best practices by encrypting your file before upload.


More InfoIf you have a promo code, please indicate it here.

Listed below are examples of the required fields on the files that we will need from you:

  • Bill of materials (BOM) in CSV (or Excel).
  • Copper, silkscreen, and solder paste layer gerbers in RS274X format.
  • XYRS data file (Pick-n-place, component locator, or X, Y, rotation, side data – Centroid of parts)

We use custom software routines to read data from most CAD programs. However, normal usage has this data in a spreadsheet or a single line textual format.


1) Your BOM needs to provide the information in a machine-readable format. The following is a XLS example which would work for us:

  • Reference Designator(s): C1C4-C6C10-1416
  • Value: .1uF 50V
  • Description: High freq NPO
  • Digikey Part Number (or MFG PN): Capxxxx-ND
  • Decal/package (Optional): 0805


2) Gerber layers: For any side with SMT parts we need three layers: copper, paste, and silk.

  • Copper layer for scaling
  • Paste for stencil (note: not solder stop or solder mask)
  • Silk verification of the polarity of diodes caps and ICs.


3) The XYRS information would be based on component centroid (or Pin1) and used by our pick-n-place machine. This information allows us to perform a quick and near perfect placement of our SMT components.

Although a CSV/XLS format is suggested for this information, we understand that various CAD programs will generate this in a ‘text’ format that is ‘standard’ (for a given CAD system). Some custom formats that we currently support include: PADs ASCII, Orcad Insert, and Eagle MNT.

The following is a usable example:

  • Reference Designator(s): C1
  • X: 1.550 mil
  • Y:  2.634 mil
  • Rotation: 90
  • Side: TOP
  • (Preferred) Decal/package: 0805

Note: A standard reference designator format is requested in order to work well with our input routines.

This format is comprised of letters followed by numbers. “CCCC####” (Examples: R1, Res0001, R9999, RArr0001)